The block can identify the temperature from -196 ℃ to 100 ℃ very quickly.
The Tube Block widely used in cooling core, dry ice, wet ice and liquid nitrogen.
Product: Metal test tube block
Metal Test Tube Block is a kind of thermo-conductive plate which offer uniform temperature to every wells, regardless of its location. the Tube Block will rapidly adjust to temperature from -196°C to 150°C when placed on a tempterature source such as ice, dry ice, liquid nitrogen or water baths.
The Tube Block guarantee temperature uniformity during sample cooling, snap freezing, heating or thawing.
All Tube Block can be autoclaved, sterilized with high heat or decontaminated using bleach, alcohol or other disinfectants or lab detergents.
All Blocks are compatibel with all temperature sources.
Product characteristics:
1. Keep the sample tube at the required temperature (from -196 ℃ to 150 ℃) without direct contact with ice, dry ice, liquid nitrogen or heat sources such as water bath, oven or incubator.
2. The sample tube is always upright and orderly to effectively avoid the pollution of foreign substances.;
3. Standardized experimental operation. When the sample is frozen, frozen, heated or thawed, the temperature of the test tube in each hole of the metal module can be kept consistent, thus making the experiment highly repeatable;
4. The surface of the module is treated by special process, which is wear-resistant, rust-proof and corrosion-proof;
5. The temperature reading module can be selected and the experimental temperature can be read at any time (some modules are applicable).
Application:
The bock can be used on different media:
1、on wet ice ,the module can balance the temperature below 4 ℃ within 90 seconds;
2、on dry ice, the module can reduce the temperature to -78 ℃ within 7 minutes ;
3、 in liquid nitrogen,the module can reduce the temperature approx to -140 ℃ in 15 minutes;
4、 In the water tank, the module can be used to heat or thaw samples.
Picture |
Specifications |
Weight |
Remarks |
|
15*1.5ml & 72*0.2ml mix block |
115g |
1.5ml centrifuge tube and 0.2ml centrifuge tube |
|
96*2.0ml Cryogenic Vials block |
2290 |
2ml Cryogenic Vials Equipped with 2 cooling cores |
|
384 orifice block with temperature display |
430g |
384 boafrd, thickness is 17mm |
|
120 * 0.2ml PCR blok |
440g |
96-well PCR board (non-skirt) 8-pipe, single-pipe |
|
35*1.5ml |
1070g |
1.5ml centrifuge tube with temperature display |
|
30*2.0ml test tube block with temperature display |
900g |
1.5ml centrifuge tube is applicable |
|
30*2.0ml test tube block |
880g |
for 2.0m frozen storage pipe |
|
customization block |
|
|
CATEGORY
Product Information
Features:
WE- Sdow bio company is an professional life scientific instruments and consumables supplier in biology, microbiology, molecular biology experiments.